How to Refill Electronic Cigarette With e-liquid

A lot of e-cigarette companies consider the Cartomizers disposable. That’s why the people just use the cartomizers for once and throw them away. Why do you want to follow them even when you are using a good cartomizer? You can refill the e-liquid in it to save money. As you know many people use expensive cartomizers; they can refill e-liquid in it tens of times before throwing into the bin. I personally ordered electronic cigarettes from http://www.sthreesolutions.com and refilled them with e-liquid and they work just like brand new ones. Here is how to refill your E-cigarette with e-liquid.

Precaution: As you know the cartridge is attached to the battery. You should unscrew to depart it. If you try to refill it while both of the parts are still attached, it may start leaking, and that can damage the batteries. So, it’s better for you to detach both of the parts and then refill the e-liquid. The method I am going to use is called the dripping method. The users of blank cartomizers (Smoketek, etc.) would find it easier enough to follow. Let’s move to the instructions below.

  • The e-cigarette companies glue the upper part of the cartomizer to avoid any leakage of the e-liquid. So, you need to apply more power to open the tight cap of the cartomizer. If your cartomizer has a small plastic ring around the filler, you need to unscrew the cap and then take that ring out.
  • Now you will see the inner part of the tank where you have to fill the e-liquid. It is a narrow pipe where you need to drip the liquid drop by drop.
  • Before you start dripping the liquid, you need to check the whole surface of the tank. If you see any brown marks around the wick, it shows the wick is burnt. It will give you a nasty taste in spite of using an expensive and fresh juice. If the wick is burnt, you need to throw the cartomizer and get a new one. Otherwise go ahead.
  • Now you will see a small narrow pipe and plane surface around it. You do not need to drop the juice into the pipe. Instead, you should drop the liquid on the plain surface.
  • Now wait for a moment and then start dripping the liquid again. You will see the dripped juice is absorbed into the surface. Fill the liquid in the tank slowly. Make sure that after dropping 6 to 7 drops you wait for a while. In an average cartomizer, you can add 25 to30 drops of the juice.
  • When it is over, just place the cap again and screw it tightly on the battery. It is ready for reuse now. Enjoy to vape once again.

Video Guide

How to Connect Dell XPS 13 Laptop to TV

Some users ask that how they can connect their XPS 13 laptop to the TV? It is because they want to play their favorite YouTube videos and iPlayer on the laptop and they want to display them on their TV. Well! It seems a hard nut to crack but not a flying pig. I am going to explain here how I do it whenever I want to display my favorite songs from my laptop to the TV.

You need to get “Dell adapter” for this purpose because it will not only include the “VGA and Ethernet” but also includes “HDMI and DVI.” You can search this adapter in the online stores like eBay and Amazon, and it will cost you £60. But some users do not want to spend this much money so; they can use a cheaper adapter from any local company rather than Dell. It will cost them only £20.01. Check this USB-C on Amazon(No affiliate link).

You can use it not only with your XPS 13 model, but also with XPS 15, and all of the latest models of ASUS and Lenovo Yoga 900 model. You do not need to connect it to the port of any other hub. Just connect directly to the adapter of the host device. Use your HDMI cable to attach with the adapter that will display your songs and videos on the TV screen. Don’t forget to enable the USB-C devices by using the DisplayPort Alternate Mode. Otherwise, it will not work.

How to Use It

Some people misunderstand that it is a “Plug & Play” device and they throw it when it does not work after plugging in. That is quite a wrong attitude. Let me explain what to do once you have plugged it into your computer.

When you connect this device with your XPS 13, you will see that your system has recognized it. It displays it as a “thumb drive.” Now it disappears.

Wait for a few seconds until it gives you a second appearance.

It will show you an application and ask you to install this app on your system.

Here, you need to use the instructions appearing on the screen to complete the installation process.

Once, you have done with it; you will be asked to reboot the system.

When the desktop appears after the reboot, you will see a mirror window. You can maximize the display if you like. Now it is ready to use.

Now try to display your desired video songs from YouTube or iPlayer on TV that is already attached to your laptop with the help of USB-C.

It worked very well when I was using Windows 8.1, and now I am using Windows 10, it again works fine.

Featured Image Source: Dell.com

How to Logout of Netflix on Windows 8

Netflix is a widely used entertainment site where you can watch your favorite movies. In Windows 7, you can visit its official website to watch movies, but Windows 8 users are at an advantage. While using Windows 8, you can get its app in your “Start” apps and can directly access the movies by using it, and you do not need to visit its site every time you want to watch any film. You can watch all of the movies free, but you have to pay only small charges for a subscription.

If you are using your personal computer, you do not need to use the logout option for this app because you do not need to provide your email ID and password the next time you visit Netflix. But some users of Windows have shared computers, and they can’t be carefree in this context. They want to log out of Netflix to maintain the privacy as they won’t like someone to access your Netflix account.

Some users of Windows 8 feel themselves all at sea when they want to sign out of the Netflix and they don’t know how to do it. It is not an uphill task if you are visiting its’ official website. Since the users of Windows 8 have Netflix app, it becomes chaotic situation for them to log out from this app. Here is a complete guide on how to log out of your Netflix account and it is for the users of Windows 8.

Video Guide

Steps to Follow

  • While the Netflix app is opened on the screen, you should press the combination of “Windows” + “C” keys on your keyboard. It will show you the “Charms bar.” You can also open Charms bar by moving the cursor of your mouse to the bottom right corner of the window. Hover your mouse cursor there until the bar appears.
  • Now you need to select “Settings” from the list.
  • Here, you need to look for the option “Sign Out.”
  • As soon you click this option, a confirmation message appears on the screen. You need to give your consent by clicking “Yes” and that’s all. You are logged out of the Netflix account now.
  • Now confirm whether you have logged out of your account or not. Go to the “Start” apps and click “Netflix” app here. You will see it will ask for your email ID and password. It shows that you have signed out of the app successfully.

Featured Image via chrome.google.com.

How to Play Runescape Game on Android

Runescape is one of the most attractive games for PC users. It is basically a 2D Java MMORPG where you perform a variety of tasks. You fight the monsters, you do fishing, mining and fight combats with other players. You also play woodcutting activity in the game. Unlike the other games, you do not find monotony in it, and this feature of the game makes it worth playing time and again. That’s the reason the users want to get this game on their Android devices to use as the best time-killing activity, and they do not find a way. Well! It is not an uphill task. You do not require rooting your Android phone. I am going to discuss a couple of tools to help you in playing this game to your Android device.

GNURoot RuneScape

You can get this tool on Google Play. It works very well to fulfill your desire of playing Runescape on Android phone. There are no hard and fast rules to download and run this app, but you should mind one thing that the game you want to play on your Android device needs a lot of space. If your internal storage is small, it will not open because you are going to run two very powerful apps including the game and the GNURoot software at the same time. So, check the internal space and free up as much space as you can to run it smoothly.

Download it here.

  • When you install this tool, you need to tap on its icon to launch it.
  • Here, you will see an option “Install/Reinstall.” Tap this option to proceed further.
  • Now select “Install X Support” that is important to run every graphical app, and since you are going to play a compelling game, it needs to install.
  • When you enter “GNURoot Runescape Installer”, you need to tap the option “Install/Update” to install the basic packages and Linux client for this game.
  • In the same installer, there will be another option “Signup for Runescape.” You need to select this option to create your account for this game. It will be either a free or paid account. The choice is yours.
  • Now select the option “Launch Runescape.”
  • Now close the app’s window and return to the game that has been launched.

(If you want to avoid installing an active Debian rootFS, relevant packages and Linux Runescape client, you should install “Hacker’s keyboard” that will lessen your burden of fixing all of the above-discussed tools).

Video Tutorial

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!